- Description
Specifications
FEATURES
|
Single ball bearing on output shaft
Precise tight fit throughout the geartrain
Being standard size and lightweight, it fits many applications
Nylon gears
One year warranty
Precise tight fit throughout the geartrain
Being standard size and lightweight, it fits many applications
Nylon gears
One year warranty
INCLUDES
|
One S3004 standard servo
REQUIREMENTS
|
Does not include any horns (use FUTM3551 for the horn set)
If mounting hardware is needed, order Screws (FUTM2250), Eyelets
(FUTM3650) and Grommets (FUTM2346)
If mounting hardware is needed, order Screws (FUTM2250), Eyelets
(FUTM3650) and Grommets (FUTM2346)
SPECIFICATIONS
|
Speed: 0.23 sec/60° @ 4.8V
0.19 sec/60° @ 6.0V
Torque: 44.3 oz-in (3.2 kg-cm) at 4.8V
56.8 oz-in (4.1 kg-cm) at 6.0V
Length: 1.59" (40.4mm)
Width: 0.78" (19.8mm)
Height: 1.42" (36mm)
Weight: 1.30 ounce (38 grams)
Connector: "J" type with approx. 5" wire
0.19 sec/60° @ 6.0V
Torque: 44.3 oz-in (3.2 kg-cm) at 4.8V
56.8 oz-in (4.1 kg-cm) at 6.0V
Length: 1.59" (40.4mm)
Width: 0.78" (19.8mm)
Height: 1.42" (36mm)
Weight: 1.30 ounce (38 grams)
Connector: "J" type with approx. 5" wire
COMMENTS
|
inch (millimeters)
1.42 (36) bottom to top of case (not output shaft)
.60 (15) flange to top of shaft
1.0 (25) flange to bottom of servo
1.59 (40.4) case length {1.93 (49) holes on-center}
.78 (19.8) case width {.39 (10) holes on-center}
sml11/29/00
ir/jl
updt jxs 10/29/04
1.42 (36) bottom to top of case (not output shaft)
.60 (15) flange to top of shaft
1.0 (25) flange to bottom of servo
1.59 (40.4) case length {1.93 (49) holes on-center}
.78 (19.8) case width {.39 (10) holes on-center}
sml11/29/00
ir/jl
updt jxs 10/29/04