- Description
Specifications
FEATURES
|
Ideal for electric planes and small electric helis
Nylon gears
Nylon gears
INCLUDES
|
Futaba S3114 Micro High Torque Servo with Micro Plug
One .91" x .64" (23mmx16mm) 4 arm servo horn (comes pre-installed)
One 1.33" x 1.33" (34mmx34mm) 4 arm servo horn
One .91" x .64" (23mmx16mm) 4 arm servo horn (comes pre-installed)
One 1.33" x 1.33" (34mmx34mm) 4 arm servo horn
REQUIREMENTS
|
Installing in aircraft and connecting to receiver
Order DUBM6924 if mounting hardware is required
Order DUBM6924 if mounting hardware is required
SPECIFICATIONS
|
6V 4.8V
Torque: 24 oz-in (1.7 kg-cm) 21 oz-in (1.5 kg-cm)
Speed: 0.09 sec/60° 0.10 sec/60°
Dimensions: 0.9 x 0.4 x 0.8" (7/8 x 7/16 x 13/16") (22 x 11 x 20mm)
Weight: 0.26oz (1/4oz) (7.5g)
Lead Length: 6.5" (165mm)
Output Shaft Diameter: 4mm
Torque: 24 oz-in (1.7 kg-cm) 21 oz-in (1.5 kg-cm)
Speed: 0.09 sec/60° 0.10 sec/60°
Dimensions: 0.9 x 0.4 x 0.8" (7/8 x 7/16 x 13/16") (22 x 11 x 20mm)
Weight: 0.26oz (1/4oz) (7.5g)
Lead Length: 6.5" (165mm)
Output Shaft Diameter: 4mm
COMMENTS
|
Do not use S3114 servos with gas or high power engine models, large
gliders, or other models that require high torque
Using supply voltage higher than 6V or applying high load to servo
will shorten the life.
Alway use the servo horn specially designed for this servo. Do not
use conventional servo horns.
Excessive force or shock to the servo horn may damage the ultra mini
precision gears inside the servo.
For the version with the Universal connector, order FUTM0414.
jxs 4/19/07
ir/jxs
gliders, or other models that require high torque
Using supply voltage higher than 6V or applying high load to servo
will shorten the life.
Alway use the servo horn specially designed for this servo. Do not
use conventional servo horns.
Excessive force or shock to the servo horn may damage the ultra mini
precision gears inside the servo.
For the version with the Universal connector, order FUTM0414.
jxs 4/19/07
ir/jxs