90% Factory-Built and Truer to the Original Plane than Most other R/C versions.

Construction: Balsa and ply
Covering: High quality shrink film
Cowl: Painted fiberglass
Wing: One-piece 81" bolt-on wing, IMAA legal, wood struts are
pre-sanded into an airfoil shape for a more authentic look than
flat struts, and also to minimize drag, Struts are REQUIRED to
safely fly this airplane. It must not be flown without struts
under any circumstances
Aileron Control: Dual servo, with "barndoor" type ailerons for
greater realism
Engine Mount: Two-piece composite construction, Adjustable
Landing Gear: Prebent wire, 3-3/8" (85.5mm) foam tires, 1" (25.4mm)
tailwheel
Fuel Tank: 9.1oz (270cc)
Build Time: Flight-ready in 15-20 hours,
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification.

Photo Illustrated Instruction Manual, Decals, One-Piece Pre-Painted
Fiberglass Cowl, ABS Dummy Engines, Adjustable Engine Mount,
Hardware Package, Factory-Built Fuselage, Wings and Tail Sections,
Fuel Tank, Firm 3-3/8" Foam Tires Mounted on Cub Rims, Pre-Bent
Wire Landing Gear, Pre-Built Wing Struts, Clear Butyrate
Windshield and Side Windows, Pushrods, Tailwheel Wire w/1"
Tailwheel, CA Hinge Strip

Wingspan: 81" (2055mm)
Wing Area: 984 sq in (63.5 sq dm)
Wing Loading: 19.9 oz/sq ft (61 g-sq dm)
Fuselage Length: 49" (1245mm)
Weight: 8.5lb (3860g)
Airfoil: Clark Y-Type, Flat-Bottom, High-Wing
Center of Gravity: 4" (103mm) back from the leading edge of the wing.
Control Throws: High Rate Low Rate
Elevator: Up & Down 1-1/8" (28mm) 5/8" (16mm)
Ailerons: Up & Down ¾" (19mm) 9/16" (14mm)
Rudder: Right & Left 1½" (38mm) 1" (25mm)

Engine: .40-.46 cu in 2-stroke (Some modifications required) or
.52-.70 cu in (8.0-11.5cc) 4-Stroke
Muffler: Sport or Pitts Style to fit into the cowl
Radio: 4 Channel w/5 standard servos
Y-harness: 1 for aileron servos
18" Servo Extensions: 2 for aileron servos
Misc Items: Propeller, Medium Fuel Tubing, ¼" Latex Foam Rubber,
Fueling System, 8-32 Tap/#29 Drill Bit, Building and Field
Equipment, prop nut to match engine's crankshaft size.