Construction: Foam
Wing: One-piece
Aileron Control: Dual Servo
Motor: 1000kV brushless outrunner with 3.5mm bullet connectors
Electronic Speed Control: SuperTigre 30A
Servos: Four micro
Cowl: Foam, attaches to fuselage with magnets
Canopy: Attaches to fuselage with magnets, clear windshield, painted
pilot bust and instrument panel decals
Landing Gear: Prebent with 2.5" (63.5mm) foam main wheels, 1/2"
(13mm) tailwheel
Propeller: 10x6 3-blade plastic
Prop Hub: Aluminum 0.63" (16mm) diameter
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both material and workmanship at the date of purchase. This
This warranty does not cover any component parts damaged by use or
modification.

RxR F6F Hellcat with ESC, Motor, Servos, Propeller, Instruction
Manual, Pilot Bust and Landing Gear

Radio: 4-channel and receiver
Battery: 3S 11.1V LiPo 1800-2200mAh
Battery Charger: Compatible with selected battery

Wingspan: 39" (990mm)
Length: 31.5" (800mm)
Wing Area: 272 sq in (17.5 sq dm)
Wing Loading: 14.8 - 16.7 oz/sq ft (45 - 51 g/sq dm)
Center of Gravity (CG): 2-5/8" (67mm) back from the wing's leading
edge at the fuselage sides
Forward Limit, 2-1/4" (57mm)
Aft Limit, 3" (76mm)
Control Throws High Rate Low Rate
Elevator, Up/Down: 7/16" (11mm) 13° 1/4" (6mm) 7°
Rudder, Right/Left: 3/4" (19mm) 19° 1/2" (13mm) 13°
Ailerons, Up/Down: 1/2" (13mm) 17° 3/8" (10mm) 12°