Construction: Traditional wooden airframe
Wing: One-piece with high quality self-adhesive transparent
covering
Assembly Time: Flight ready in approximately two hours
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both materials and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification

35" CrazE Wing EP Flying Wing
with hardware package, decal sheet and instruction manual

Radio: 3-4 channel with elevon mixing
Servos: Two micro size w/at least 38 oz-in (2.73 kg-cm) torque
Brushless Motor: 30-35-1000Kv such as TOWG2000
Electronic Speed Control: 40A, brushless capable
LiPo Battery: 3S-4S 1800-2200mAh
Battery Charger: Compatible with selected battery
Propeller: 9x6e (3S LiPo power) or 8x8e (4S LiPo power)
LiPo charging bag and field equipment

Wingspan: 35" (900mm)
Wing Area: 409 sq in (26.4 sq dm)
Wing Loading: 7.0-8.1 oz/sq ft (21.3-24.79 g/sq dm)
Length: 18.75" (476mm)
Weight Range: 20-23oz (567-652g)
Center of Gravity (CG): 1-1/4-1-7/8" (31-47mm) from the leading edge
of the wing measured at the motor/battery box
Control Throws: High Rate Low Rate
Elevator, up/down: 3/4" (19mm) 16° 1/2" (12.5mm) 10°
Ailerons, up/down: 1-7/8" (47.5mm) 34° 3/4" (19mm) 16°