Construction: Balsa and ply
Wing: Two-piece, with 0.51 x 15.4" (13 x 392mm) wing joiner tube
Aileron Control: Dual servo
Motor Mount: Assembled plywood
Cowl: Painted fiberglass
Landing Gear: Two-piece prebent aluminum with 2" (51mm) diameter main
wheels, 1" (25.4mm) diameter tailwheel
Wheel Pants: Painted fiberglass
Spinner: 2" (51mm) plastic, white in color
Battery Hatch/Canopy: Plastic and plywood construction with clear
canopy
Warranty Period: Tower Hobbies guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This warranty does not cover any component parts damaged by use or
modification.

Prebuilt Wing, Fuselage and Tail sections, Cowl, Landing Gear, Wheel
Pants, Decals and Instruction Manual

Radio: At least 4-channel with 4-5 channel receiver
Servos: Four mini
6" (150mm) Servo Extensions: Four for ailerons
Motor: ElectriFly Rimfire .32 recommended
ESC: 75A if using motor recommended above
LiPo Battery: 3300-4000mAh 4S
Battery Charger: Compatible with selected battery
Propeller: 13x8E or 14x7E
LiPo Charge Bag
Building and field equipment

Wingspan: 49.6" (1260mm)
Length: 47.5" (1207mm)
Wing Loading: 19-20oz sq-ft (58-62g sq/dm)
Wing Area: 482.0 sq in (31.1 sq dm)
Weight: 4.0-4.3lbs (1814-1928g)
Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of
the wing measured at the fuselage.
Wing Joiner: 0.51 x 15.4" (13 x 392mm)
Recommended CG Range: 2-3/4" - 3-3/4" (70mm - 95mm)
Control Surface Throws;
Low Rate High Rate 3D
Ailerons, 7/8" (22mm) 13° 1-1/2" (38mm) 23° 2-1/2" (64mm) 40°
Elevator, 5/8" (16mm) 9° 1-1/4" (32mm) 17° 2-1/2" (64mm) 37°
Rudder 1-1/2" (38mm) 15° 2" (51mm) 20° 2-1/2" (64mm) 25°

jxs 07/18/17