Construction: Balsa and ply
Wing: One-piece with two plywood wing joiners
with dual servo aileron control
Covering: High-quality iron-on
Motor Mount: Plywood
Engine Mount: Two-piece composite plastic
Cowl: Painted fiberglass
Hatch: Plywood and balsa with dual windshields
Landing Gear: --" (--mm) diameter prebent wire with --" (--mm)
wheels, prebent wire tail gear with --" (--mm) diameter wheel
Fuel Tank: Approximately --oz (--cc)
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship
at the date of purchase. This warranty does not cover any
component parts damaged by use or modification.

Prebuilt Wing, Fuselage and Tail Surfaces, Cowl, Landing Gear,
Fuel Tank, Hardware and Instruction Manual

Radio: 4-5 channel
Servos: 4-5 mini digital
6" (150mm) Servo Extensions: Two if mixing aileron servos
electronically with programmable mixing in transmitter
Dual Servo Extension: One if connecting servos with Y-harness
Building and field

For Electric Power;
Motor: 1.65" (42mm) 925W, 42-50-800 ElectriFly RimFire .32
recommended
Electronic Speed Control: Castle Creations Edge Lite 75 if using
motor listed above
Battery: LiPo 4S, at least 3300mAh
Battery Charger: Compatible with selected battery
Propeller: To match selected motor
For Glow Power;
Engine: .46 - .55 cu in 2-stroke, or .70 cu in 4-stroke
Propeller: To match selected engine

Wingspan: 56.5" (1435mm)
Length: 46.2" (1173mm)
Weight: 80 - 88oz (2268 - 2495g)
Wing Area: 536.7 sq in (34.62 sq dm)
Wing Loading: 21.5 - 23.6 oz/sq ft (65.5 - 72.0 g/sq dm)
Center of Gravity (CG): 2-3/4 - 3-3/4" (70 - 95mm) back from the
leading edge of the wing measured at the fuselage
Control Throws; Low Rate High Rate
Elevator, up & down: 3/8" (10mm) 9° 1/2" (13mm) 11°
Rudder, right & left: 1" (25.4mm) 14° 1-1/2" (38mm) 20°
Ailerons, up & down: 3/16" (5mm) 8° 3/8" (10mm) 9°