Construction: Pre-built and pre-covered all wood construction
Wings: One piece pre-covered, with plywood wing joiner
Covering: MonoKote
Radio Compartment: Plywood reinforced, easily accessible under wing
battery compartment located between cowl and canopy under
magnetically secured hatch cover
Cowling: Painted fiberglass
Canopy: Single, tinted
Landing Gear: Pre-formed wire with 2.1" (54mm) foam main wheels
Tail gear: 2mm diameter wire with 1" (25.4mm) foam tailwheel
Wheel Pants: Painted fiberglass
Aileron Control: Single servo, full strip ailerons offer basic
aerobatic potential for loops, rolls, spins and more
Hardware: Included
Building Time: Ready to fly in 5-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase. This warranty does not cover any component parts
damaged by use or modification.

Pre-built and covered wing, fuselage and tail, pushrods, prebent
wire main landing gear, 2" main wheels, 1" tail wheel, 2" (51mm)
red spinner, fiberglass cowl and wheel pants, tinted canopy, decals,
hardware package and photo-illustrated instructions

Radio: 4 channel with micro receiver
Servos: 3 micro
Motor: Brushless outrunner type
ESC: 45A for brushless motors
Battery: 11.1V LiPo, 3200 - 3700mAh
Battery Charger: LiPo compatible
Cell Balancer: For battery listed above
Building and field equipment

Wingspan: 48" (1220mm)
Wing Area: 383 sq in (24.7 sq dm)
Weight: 2.7 - 3 lb (1250 - 1360 g)
Wing Loading: 17 - 18 oz/sq ft (52 - 55 g/sq dm)
Length: 39" (990mm)
Airfoil: Semi-Symmetrical
Center of Gravity: 2¾" (70mm) Back from the wing's leading edge
at the fuselage sides.
Incidence: Stabilizer: 0°
Main Wing: 1°
Thrust Angle: Down 3°; Right 2°
Control Throws- Low Rate High Rate
Ailerons: Up & Down 1/4" (6mm) 16° 3/8" (10mm) 25°
Elevator: Up & Down 3/8" (10mm) 9° 1/2" (13mm) 12°
Rudder: Right & Left 3/4" (19mm) 13° 1" (25mm) 18°