Construction: Laser cut balsa and plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Cowling: Pre-painted Fiberglass
Canopy: Clear with painted-on frame lines
Spinner: 2.7" (70mm)
Landing Gear: Mechanical retracts with CNC suspension metal struts
Wheels: Two --" (--mm) foam main, one --" (--mm) nose wheel
Aileron Control: Dual servo
Fuel Tank w/pre-assembled stopper, approximately 10oz (300cc)
Warranty Period: 90 Day Limited Warranty

For Glow Operation;
Engine: .61 - .91 2-stroke

For Gasoline operation;
Engine: 15-20cc

For Electric Operation;
Brushless Motor: Rimfire 80
Electronic Speed Control: 60-100A
Propeller: 12x6 - 13x4
LiPo Battery: 6S-10S up to 4000 - 5500mAh

Radio: 6-channel
Servos: Eight standard (2-aileron; 2-flap; 1-elevator; 1-rudder;
1-steering nose, 1 throttle; and 3 retract gear)
Servo Extension:
Y-Harness: Two (one for ailerons, one for elevator)
Receiver Battery: 4.8-6V 2000 mAh NiMH
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.

Wingspan: 57" (1450mm)
Weight: 10.1 - 11lb (4600 - 5000g)
Length: 60.3" (1533mm)
Wing Area: 597 sq in (38.5 sq dm)
Wing Loading: 41.9 oz sq/in (128g sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Wing Tube Dimensions: Length: 18.25" (463mm), Diameter: 0.75" (19mm)

Center of Gravity: 5.4" (138mm) Back from the wing's leading edge
measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.31" (9mm) 12% expo 0.43" (11mm) 12% expo
Rudder: 0.79"(20mm) 15% expo 1.2" (30mm) 15% expo
Ailerons: 0.31" (8mm) 10% expo 0.39" (10mm) 10% expo
Control Throw Flap: 15-20mm down