Construction: Balsa and ply
Wings: Two-piece with NACA airfoil, aluminum wing joiner,
dual servo controlled flaps to slow landing speed
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Fiberglass, painted to match color scheme
Landing Gear: Mechanical retracts, prebent wire tail gear with
3" (76mm) diameter wheels
Fuel Tank: 12oz (355cc) approximate
Engine Mount: Two-piece composite
Motor Mount: Plywood

ARF SBD Dauntless with Retractable Landing Gear, Wheels, Wheel Pants
Cowl, Painted Pilot and Instruction Manual

Radio: 6-channel minimum
Servo: 7 standard,: 2-aileron; 2-flap, 1-elevator; 1-rudder;
1-throttle (if using glow engine)
Retract Servo: 180° Futaba S3170G Digital Planetary Gear Retract
Servo recommended
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For electric power;
Brushless Motor: Rimfire .46 - .55
ESC: 50-80A, to match selected motor
LiPo Battery: 4-6S, at least 4000mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, propeller, field equipment
Glow Power;
Engine: .46-.55 cu in 2-stroke, OR .52 cu in 4-stroke
Propeller: For selected engine
Glow fuel, glow starter, field equipment

Wingspan: 56.7" (1440mm)
Length: 44.9" (1140mm)
Flying Weight: 106 - 116oz (3,000 - 3300g)
Wing Area: 651 sq in (42 sq dm)
Wing Type: NACA
Center of Gravity: 4.5" (115mm) back from the leading
edge of the wing measured at the fuselage
Control Throws- Low High
Ailerons: 0.31" (8mm) 10% Expo 0.39" (10mm) 10% Expo
Elevator: 0.31" (8mm) 12% Expo 0.39" (10mm) 12% Expo
Rudder: 0.79 (20mm) 15% Expo 1.2" (30mm) 15% Expo
Flap: 0.59-0.79" (15-20mm) down