Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiners
Aileron and Flap Control: Dual servo
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Cowling: Pre-painted Fiberglass
Canopy: Clear
Landing Gear: Shock absorbing scale painted steel main gear,
prebent aluminum tail gear
Wheels: Two 4.25" (108mm) rubber main, one 1" (25mm) tail wheel
Fuel Tank w/pre-assembled stopper, approximately 24oz (720cc)
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty

ARF Super Cub PA-18 Airplane with Landing Gear, Wheels, Fuel Tank,
Decals, Instrument Panel, Pilot, Instruction Manual

For Glow Operation;
Engine: 1.20 2-stroke, or 1.40 4-stroke

For Gasoline Operation;
Engine: 20cc

For Electric Operation;
Brushless Motor: 1600-2000W
ESC: 120-160A
LiPo Battery: 5S-6S up to 5500 - 6000mAh

Radio: 6-channel
Servos: Eight standard high-torque (2-aileron; 2-flap; 2-elevator;
1-rudder; 1 throttle)
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 1200-2000mAh NiMH
Prop Nut: To match engine crankshaft or motor shaft
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.

Wingspan: 90.5" (2300mm)
Weight: 10.1 - 11lb (4600 - 5000g)
Length: 57.9" (1472mm)
Wing Area: 1220 sq in (78.7 sq dm)
Wing Loading: 25.7 oz sq/in (78.5 g sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 3.7" (95mm) Back from the wing's leading edge
measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.31" (9mm) 12% expo 0.43" (11mm) 12% expo
Rudder: 0.79"(20mm) 15% expo 1.2" (30mm) 15% expo
Ailerons: 0.31" (8mm) 10% expo 0.39" (10mm) 10% expo
Control Throw Flap: 15-20mm down