Construction: Balsa and ply
Wings: Two-piece with aluminum wing tubes, and semi-symmetrical
Clark-Y airfoil
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Fiberglass
Landing Gear: Main, 2.5" (63mm) foam wheels, 1" (25.4mm) tailwheel
Fuel Tank: 14oz (420cc) approximate
Engine Mount: Two-piece composite
Motor Mount: Plywood

ARF Tiger Moth Biplane with Landing Gear, Wheels, Wheel Pants
Cowl, Painted Pilot and Co-Pilot, and Instruction Manual

Radio: 4-channel minimum
Servo: 5 standard,: 2-aileron; 1-elevator; 1-rudder; 1-throttle (if
using glow engine)
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For electric power;
Brushless Motor: Rimfire .46-.55
ESC: 50-80A
LiPo Battery: 6S, at least 4000mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, propeller, field equipment
Glow Power;
Engine: .46-.55 cu in 2-stroke, OR .52 cu in 4-stroke
Propeller: For selected engine
Glow fuel, glow starter, field equipment

Wingspan: 55.3" (1404mm)
Length: 44.6" (1134mm)
Flying Weight: 7.05 - 7.5lbs (3.2 - 3.4 kg)
Wing Area: (58sq dm)
Wing Type: Semi-symmetrical Clark-Y airfoil
Center of Gravity: 3.5" (90mm) back from the leading
edge of the upper wing measured at the fuselage
Control Throws- Low High
Ailerons: 0.39" (10mm) 10% expo 0.47" (12mm) 10% expo
Elevator: 0.31" (8mm) 12% expo 0.39" (10mm) 12% expo
Rudder: 0.98" (25mm) 15% expo 1.57" (40mm) 15% expo
Wing Bolts: 4.5x30mm