- Description
Almost Ready to Fly Ryan STA Aerobatic Airplane from Tower Hobbies.
FEATURES
|
Construction: Balsa and ply
Wing: One-piece, two plywood wing joiners, dual servo aileron control
with short direct linkage for precise control
Covering: High quality iron-on
Motor Mount: Plywood
Landing Gear: Prebent wire with 2.5" (63.5mm) diameter main wheels
and 1" (25.4mm) tailwheel
Wheel Pants: Hand laid painted fiberglass
Fairing: Hand laid painted fiberglass
Cowl: Hand laid painted fiberglass, cowl attaches to fuselage with
magnets
Spinner: White plastic 1.75" (44.5mm) diameter
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification.
INCLUDES
|
Prebuilt Wing, Tail and Fuselage Assemblies, Spinner, Wheels,
Landing Gear, Clear Windscreen and Instruction Manual
REQUIREMENTS
|
Radio: At least 4-channel
Servos: Four slim or mini size
Servo Extensions: Two 9" (229mm) or one 12" (305mm)
Brushless Motor: Rimfire .32 (42-50-800)
Electronic Speed Control: 75A
Propeller: To match selected motor
Battery: 3S 11.1V at least 3200mAh recommended
Battery Charger: Compatible with selected battery
Charging Bag, Battery & Motor Connectors, Building and Field
Equipment
SPECIFICATIONS
|
Length: 40" (1016mm)
Wingspan: 53" (1346mm)
Wing Area: 424sq in (27.35sq dm)
Wing Loading: 20.3 - 22.1oz/sq ft (61.9 - 67.4g/sq dm)
Weight: 60 - 65oz (1700 - 1842g)
Center of Gravity (CG): 2-3/8 - 2-5/8" (60 - 67mm) measured from the
leading edge of the wing
Control Throws High Rate Low Rate
Elevator, Up/Down: 5/8" (16mm) 12° 7/16" (1mm) 8°
Rudder, Right/Left: 1-1/8" (28mm) 20° 7/8" (22mm) 16°
Ailerons, Up/Down: 15/16" (24mm) 31° 5/8" (16mm) 20°